Description

Custom QR Code Decals is one of the best ways to allow your website/social media channels to be more accessible to your customers. You can stick the decal on your shop windows, car window, office glass door and etc.

Whether you want to inform customers about your brand, opening hours, products, or the services you offer – just send us all the necessary details and we’ll get to work right away.

Please send us your QR code through chat as a PNG in Black with a White background preferably. If you don’t have it like this please send what you have and we can usually work with that.

Please let us know in the order notes section if you’d like the decal to go inside the glass as it will need to be reverse cut. (Glare of glass can sometimes make QR scan more difficult if placed inside the glass) The decal will be cut to be placed on the outside of the glass unless otherwise stated to us.

Available in multiple colors of the best vinyl for the job, Oracle 651 (6 year weather rating). As well as the fastest turnaround time anywhere!

Application Steps: (Professional Installation Recommended)

1. Clean the application surface with soap and water or rubbing alcohol (70% isopropyl alcohol). Area must be dry before application. Do not use chemicals or cleaners with water repellent properties.

2. Squeegee the decal on a flat surface to assure it is stuck to the transfer tape and ready for install.

3. Hold up the decal to the desired location. Then put a piece of masking tape down the middle of the decal. The tape should start above the decal and go all the way down through the center and below the decal.

4. The masking tape will be used as a hinge for installation. Carefully peel back transfer tape with the decal on it from one side of the decal left or right. Hold the transfer tape back while you tear or cut away the backing paper.

5. Carefully lay the transfer tape back down to your application surface starting from the center and applying out-words using light pressure with your squeegee from middle to outside.

6. Remove the the masking tape. Repeat step 4 and 5 for the other side of your decal completely removing the backing paper with this final side. Then firmly squeegee your entire decal from the middle to the edge.

7. Now that your decal is installed with the transfer tape still on top. Slowly peel back the transfer tape from a corner of your decal holding the transfer tape as flat and low as possible for easiest application.

8. Enjoy your perfectly applied background-less decal for a clean professional appearance.